Loading... Please wait...
  • Mitsubishi L200 Eagle1 Power Lock Tailgate Lock

Mitsubishi L200 Power Lock Central Locking Tailgate Kit 2006-2015

£57.00 (inc VAT) £47.50 (exc VAT)
Product Code:
Delivery Usually 2-3 Working Days

Product Description

Mitsubishi L200 Eagle1 Tailgate Power Lock – Central Locking kit for your tailgate.


*fits 2006-2015 Series 4 L200, - Will not fit the 2016 + Series 5 L200 for this model you need item number 2919


Lock your tailgate from your existing vehicle key fob with the Eagle1 Power Lock. This unique design secures your tailgate, giving you maximum protection.


It may come as surprise to you, but the tailgate on your L200 does not lock as standard, leaving your bed exposed. The Eagle1 Power Lock coverts your tailgate into central locking working in conjunction with your existing central locking and existing key fob.


The L200 tailgate power lock works great in conjunction with tonneau covers and hardtops maximising the security of your pickup.


  • Automatically locks the tailgate when power doors are locked using key fob
  • Hidden mounting inside tailgate
  • Easy non drill installation – fits in less than 1 hour

Product Reviews

Write Review

Showing reviews 1-10 of 15 | Next


    Posted by CHARALAMBOS SEFTALIS on 23rd Jul 2019

    excellent product. easy to fit.

  2. easy to fit

    Posted by jack on 22nd May 2019

    Easy to fit , hardest bit was fitting the gromit to pass the wires through into the cab . Clear Instructions, on the whole . The wire clips supplied where bit fiddly but great product

  3. Excellent product

    Posted by Andy on 15th Mar 2018

    Already have a truckman top fitted with a lock but never felt secure as the tailgate could be easily forced open. Brought tailgate lock and very pleased with the product. Only took an hour to fit and the instructions and photos made the whole job very easy to do. Highly recommended.

  4. Great way to secure the rear of your truck

    Posted by Stuart on 4th Oct 2017

    Bought this to finally secure the bed of my truck. I am usually rubbish at DIY but managed to fit this so I can definitely confirm the simple installation process. One tip I would add though is do not use all of the protective flexible tubing to protect the wiring going through the tailgate grommet (as I did), save a few inches for the wiring that needs to pass through the grommet under the passenger seat also. Some electrical tape took care of that small oversight, so an easy fix. Other than that, the instructions were fairly clear, although I have to admit I did not initially realise that the "red clips" were scotch locks to splice the new locks wiring into the trucks wiring loom, so it would not hurt to explain that somewhere for complete wiring novices like myself. Also, to make sure that the scotch locks are closed fully to ensure a good electrical connection.

    Tools used: Star head screwdriver to remove screws from tailgate cover. Socket set needed to secure locking mechanism in place. Scissors to make hole in grommet to pass tubing / wiring through. Needle nose pliers to assist getting wiring through and help replace grommet under passenger seat. Ratchet driver to remove screws from door sill cover and a set of regular pliers to close the scotch locks fully.

    Time to fit: About 80mins for a complete DIY amateur like myself

  5. Does exactly what it says

    Posted by Unknown on 30th Jul 2017

    Excellent, fitted in bang on the hour. Such a simple bit of kit but works perfectly.

  6. my tools are super safe

    Posted by jon on 6th Jul 2017

    Brilliant fits in 30 mins
    I have a van vault slider bolted to my truck, with this tail gate lock robbers will have to break two locks to get to any tools and once the canopy goes on well it be even more secure highly recommend to get one fitted I am even gonna tell u to get it done for the sake of it as u lock the truck u hear it lock its load which is great any one watching will know it's locked brilliant

  7. Great product, simple installation

    Posted by Rich on 4th May 2017

    I bought this for my L200. I was hesitant about fitting it myself but I live too far away from the fitting centre. I needn't have been, fitting was really simple and the person on the phone were really helpful explaining each step of the installing process before I purchased. Running the wire under the vehicle is there hardest bit but it really does only takes an hour to fit and works perfectly.

  8. locked tailgate

    Posted by Brian on 10th Apr 2017

    Bought this tailgate lock after reading about them on L200 forums which gave it rave reviews. Was unsure how way easy/hard it would be to fit. My view is anybody with a bit of common sense will fit this with ease. Very easy to fit and the picture on the instructions are spot on. Feel so much better about the truck knowing tools are safely locked away in the back. Shame Mitsubishi can't fit this as standard. Good quality product.

  9. Does the job

    Posted by Rik on 25th Oct 2016

    Seems very well made...fitted in under an hour (including an error with wrong loom selection by me)...works as described..fitted to my 2006 L200 Barbarian. For that model vehicle only thing to watch is you connect to the rearmost positioned wiring loom under the drivers seat (there are 2 looms close to each other)...and select the wires with the 2 silver dots...I believe they are redoing the installation info to say that....

  10. Great lock

    Posted by Rob on 29th Jun 2016

    Great price for such a simple thing. Shame the manufacturers don't fit them as standard and why they don't is a mystery!
    Worth its money and does exactly what it should in locking the tailgate, I can now fit my roll top without being worried the tailgate can be undone and tools stolen. Don't know how easy it is to fit as I had my mechanic at local garage fit it while it was in for service but he didn't say it was an issue so must be fairly straight forward.

Showing reviews 1-10 of 15 | Next